An efficient method of generating vortex electromagnetic wave based on double‐layer transmissive metasurface

A broadband double‐layer transmissive metasurface (TMS) for effective generate vortex electromagnetic wave is presented in this paper. The proposed TMS consists of two types of elements. The first element is composed of a multi‐resonant dipole and four metal vias. The metal vias increase the coupling strength between the upper and lower layers to improve transmission efficiency. On the basis of the first element, the second element adds stubs to ensure sufficient phase shift. The far‐field cross polarisation is eliminated by special element arrangement. Then, a centre‐fed linear polarisation TMS is designed to generate orbital angular momentum beams with mode l = ? 1. The proposed TMS is designed, manufactured and measured to verify the proposed design. The measured results indicate that a maximum gain of 20.8 dBi and narrow divergence angle of ±5° are achieved at 18 GHz. Furthermore, mode purity is higher than 86.1% within the 17 to 19 GHz band. The proposed double‐layer TMS saved costs, reduced weight and without assembly error is a good candidate for OAM generator.     

基于VMD瞬时能量与GA- RBF的滚动轴承故障诊断

针对滚动轴承早期故障的有效识别,提出了一种基于VMD瞬时能量与GA优化的RBF神经网络的滚动轴承故障诊断方法,可以有效对滚动故障做出诊断。首先,VMD将滚动轴承振动信号进行分解成合适数目的本证模态函数;其次,计算本证模态函数分量的瞬时能量并组成特征向量;最后,将特征向量输入到GA优化的RBF神经网络实现轴承故障识别。通过滚动轴承故障诊断实验对该方法进行验证。结果表明,该方法识别滚动轴承故障的准确率为96.43%,较默认参数的RBF神经网络和EEMD瞬时能量与GA-RBF神经网络有明显的提高,证明了所提方法的可行性。     

空间红外大口径折射式低温镜头设计与验证

针对目标探测类空间红外相机大范围成像、高灵敏度探测、高精度定位等应用需求,文中提出采用像方远心光路和低温光学技术结合的解决方案,设计了物方视场角8°×8°、入瞳口径265 mm、工作温度200 K的像方远心折射式光学系统。镜头最大口径280 mm,采用多级分散的弹性支撑设计,解决大口径低温透镜装框、透镜组件支撑和镜头整体安装各环节的热应力卸载问题。在保证高刚度和低漏热的情况下,使低温下透镜的热应力对镜头能量集中度的影响降低到可接受范围内。镜头完成装调及室温下像质确认后,进行了力学振动试验,并将其制冷到200 K水平测试像质,测试结果表明,镜头能量集中度达到轴上75%,边缘视场72%。     

全地域机动车驾驶室声学特性分析

以某全地域机动车驾驶室为研究对象,建立驾驶室的有限元模型,验证了有限元模型的有效性。以此有限元模型为基础构建驾驶室谐响应模型,进行谐响应分析,发现驾驶室后壁板的振动是引起驾驶室内部噪声的主要原因。研究驾驶室内部噪声特性,分别进行了声学空腔模态分析和声固耦合模态分析,发现声固耦合系统声压分布比较均匀,大部分呈现局部模态,主要原因可能是驾驶室后壁板的振动。通过驾驶员耳旁声压分析发现增加驾驶室后壁板的厚度,可以在一定程度内降低驾驶室内部噪声对驾驶员的影响,为同类驾驶室通过依靠结构改进来改善声场环境提供了案例依据。     

Corrosion behaviour of an industrial shot-peened and coated automotive spring steel AISI 9254

A high-strength low-alloy steel, AISI 9254 (54SiCr6), is widely used for suspension spring production in the automotive industry. In this work, industrially manufactured zinc phosphate coated helical springs are subjected to detailed microstructural and surface analysis for better understanding of corrosion evolution. The material’s free corrosion potential and anodic/cathodic behaviour were investigated in NaCl solutions and corrosion propagation mechanisms were studied using potentiostatic polarisation on cross-sectional and external surfaces. The bulk material is fully martensite with uniformly distributed MnS inclusions, while the spring surface has a 2–3?μm mechanically deformed region introduced by shot-peening and a thin zinc phosphate coating. The corrosion open circuit potential of bulk material and shot-peened spring surface was about –0.7V_SCE without significant difference, while phosphated surface is more noble (more positive potential). MnS inclusions, stimulating the anodic attack in the steel, influence corrosion propagation and pit morphology to a large extent that can have an impact on the spring performance.     

Microwave dielectric ceramics in (Mg1/3Sb2/3)O2-ZrO2-TiO2 system with near zero τf and low loss in a very wide range

A series of (ZrTi)_1-x(Mg_1/3Sb_2/3)_2xO₄ (0.04?≤?x?≤?0.36) ceramics were successfully synthesized through the conventional solid-state processing. Appropriate content of CuO was added as sintering aids to promote the density of ceramics. The XRD analysis revealed that the main crystalline phase of ceramics sintered at optimal temperature belonged to α-PbO₂-type structure. Raman spectroscopy and far infrared reflectivity (FIR) spectra were employed to study the phonon modes of ceramics, which explained the relationship between microwave dielectric properties and structure. It is interesting that the τ_f are near-zero (+6.6 ~ ?4.6?ppm/°C) and meanwhile the Q×f are relatively high (29,000–41,800?GHz) for samples with x in a very wide range of 0.10–0.36. In this range, their dielectric constants (ε_r) can be adjustable from 35.4 to 24.4. The results demonstrated this ceramic system is a potential candidate for microwave dielectric applications requiring an adjustable dielectric constants and near zero τ_f.     

基于多参数特征保留的载荷谱加速耐久性编辑

为了得到时间更短加载效果相同的加速耐久性试验载荷谱,提出了基于多参数特征保留的载荷谱编辑方法。该方法同时考虑载荷谱的损伤、功率谱密度以及统计参数等信息,对零部件载荷谱的时间进行压缩。以汽车悬架螺旋弹簧的载荷谱为例,采用该方法进行缩减,同时从多个参数特征方面与传统的基于损伤保留的编辑方法所得到的载荷谱进行对比。为了进一步验证编辑效果,采用编辑谱和原始谱对弹簧进行疲劳仿真。结果表明,该方法能够有效缩短汽车零部件的载荷谱,可得到与原始载荷谱具有相同加载效果的编辑载荷谱。     

抄浆压包机控制方式和应用

介绍了压包机的工作原理、控制方式、逻辑联锁、液压系统以及压包机常见的故障和维修保养等。     

平面桁架构建的定日镜面形支撑结构优化及实验

针对反射面成型的复杂影响因素，提出平面桁架构建的定日镜面形支撑结构优化技术路线. 利用模拟仿真、数值计算和优化算法等方法，解析20 m²定日镜面形定义技术路线的4个组成环节：面形规格及宽高比、上弦杆的截面矩、平面桁架组间距的最优值、机加工中工艺控制要点的量化. 试制小型定日镜进行实验，分析光斑形状和能流密度分布特性，并与理想球面形光斑比较，两者的拟合优度大于0.98. 实验结果表明，当反射镜宽高比取1.2，上弦杆截面矩取40 000 mm⁴，桁架组间距取950 mm，上弦杆和斜杆的开孔公差小于0.9 mm时，反射面形的质量提升. 研究从原理和实践上证明了该优化技术路线的可行性.     

Dynamic analysis of tapping mode atomic force microscope (AFM) for critical dimension measurement

Transient dynamics of tapping mode atomic force microscope (AFM) for critical dimension measurement are analyzed. A simplified nonlinear model of AFM is presented to describe the forced vibration of the micro cantilever-tip system with consideration of both contact and non-contact transient behavior for critical dimension measurement. The governing motion equations of the AFM cantilever system are derived from the developed model. Based on the established dynamic model, motion state of the AFM cantilever system is calculated utilizing the method of averaging with the form of slow flow equations. Further analytical solutions are obtained to reveal the effects of critical parameters on the system dynamic performance. In addition, features of dynamic response of tapping mode AFM in critical dimension measurement are studied, where the effects of equivalent contact stiffness, quality factor and resonance frequency of cantilever on the system dynamic behavior are investigated. Contact behavior between the tip and sample is also analyzed and the frequency drift in contact phase is further explored. Influence of the interaction between the tip and sample on the subsequent non-contact phase is studied with regard to different parameters. The dependence of the minimum amplitude of tip displacement and maximum phase difference on the equivalent contact stiffness, quality factor and resonance frequency are investigated. This study brings further insights into the dynamic characteristics of tapping mode AFM for critical dimension measurement, and thus provides guidelines for the high fidelity tapping mode AFM scanning.